add share buttons

Istriadalmaziacards

Cartoline Storiche

This content shows Simple View

vw suspension bushings

VW Suspension Bushings: What You Need To Know?

If you're looking for a way to improve the suspension of your new Volkswagen, you should be aware that VW suspension bushings are unique and require special equipment to install. 

If you've ever had to replace your VW control arm bushings, you're not alone. In fact, VW owners are notoriously prone to suspension issues, which is why it's important to know what kind of bushings your car uses and how to replace them. Here's a guide to help you out.

Volkswagen suspension bushings are typically made of polyurethane or a similar material. They help to reduce the motion between the suspension components and the road, which can minimize noise and improve ride quality.

To replace your VW suspension bushings, first remove the front and rear drive shafts. Then, remove the ball joints, control arms, and subframe connectors. Finally, remove the suspension bushings by prying them off with a screwdriver or a special tool. Note: If your VW uses coilovers, you'll also need to remove the coilover springs before replacing the bushings.

When it comes to Volkswagen suspension bushings, you want to be sure that you are getting the right ones for your vehicle. In this article, it will go over the different types of VW suspension bushings and what each one is used for. 

Also discuss some of the pros and cons of each type, so that you can make an informed decision about which ones best suit your needs.




top