Micron Technology, Inc. engages in the provision of innovative memory and storage solutions. It operates through the following segments: Compute and Networking Business Unit (CNBU); Mobile Business Unit (MBU); Storage Business Unit (SBU); and Embedded Business Unit (EBU).
Micron Technology in Flash programmers:
XStream-Iso and XStreamPro-Iso adapters can directly program External Flash memory from Micron Technology Inc when it is connected via a serial peripheral interface to the programmer.
Using FlashPro-M and GangPro-M software.
Micron Technology memory must be connected to the programming adapter via a serial peripheral interface
Up to 1 MBytes/s programming (up to 20MHz, depending on target memory).
I/O port configuration can also be saved in configuration files and used in DLL or shared libraries.
Supports QSPI, SPI programming.
2. The XStreamPro-Iso adapter can program External Flash memory using JTAG/SWD when it is connected to MCU SPI peripheral.
Can program both target MCU internal flash and any connected external flash from Micron using JTAG/SWD interface only. Does NOT require a connection between the programmer and external SPI flash memory. The target MCU is used as a proxy for programming.
Using FlashPro-ARM and GangPro-ARM software.
Micron memory must be connected to the target MCU via a working serial peripheral interface (OCTOSPI, Dual-QSPI, QSPI, SPI, etc.).
I/O port configuration utility provided in GUI. Allows interactive configuration of MCU peripheral interface pins to memory.
I/O port configuration can also be saved in configuration files and used in DLL or shared libraries.
Supports JTAG, cJTAG, and SWD communication (this is dependent on target MCU).
Supports OCTOSPI, Dual-QSPI, QSPI, SPI programming (multiple ports and modules dependent on target MCU).